Hot Acrylic Electric Folding Machine and PVC Plastic Folding Machine, with Manual Sheet Heater, Sheet Heating Tool, Heating Thickness ~/

Acrylic folder parameters:Voltage: 110 V/220 VFrequency: 50/60 HzPower: 300 W, 800 W, 1500 WMaximum bending width: 30 cm, 60 cm, 125 cmHeating thickness: 1 mm - 6 mmRecommended temperature for some common materials:Acrylic: 210 ° C.Perspex: 195 ° C.PVC sheet: 155 ° CABS: 190 ° C.PET: 160 ° C.Note: Only as a reference.Users can modify it according to their materials and work needs.Work habits.Package included:1*heat acrylic folding machineGrades:1. Read the manual carefully and pay attention to the security precautions included.The recommended temperature data are only reference.Make the corresponding adjustments according to the real situation and their work habits.2. It must be placed in a dry, clean and ventilated place, and the machine must be operated horizontally and without problems.Keep it away from flammable and explosive materials.If the machine is not used for a prolonged period, unplug the power cable.3. For safety reasons, you must connect to a reliable grounding device, which must have three legs connected to the ground.The heating process generates high temperatures, so you should avoid contact with the fingers or skin in the heating area.

• Acrylic folding machine with accurate and uniform heat distribution: water action cooling on both sides of the heating tube guarantees that thermal deformations are not produced, except where heat is required.The power supply and water pipe are connected at both ends.
• High quality materials: The body is manufactured with special aluminum profiles.Maximum curvature width: 30 cm (12 inches), 60 cm (24 inches), 125 cm (49 inches).Heating thickness: 1-6 mm (0.04 inches and 0.24 inches).Light and practical, low consumption and reliable functioning.
• High performance: acrylic folder allows all kinds of plastic sheets to be folded.If the thickness of the acrylic lamina exceeds 6 mm, you can use two heaters to heat the upper and lower part simultaneously, or you can cut a slot in the sheet.
• Easy to use: The PVC booths is well designed, it is easy to transport and occupies little space.It is easy to connect and disconnect, easy to store and ride easily in the work bank.
• Wide application: The acrylic folding machine can process acrylic, organic board, PVC and various thermoplastic materials, widely used in decoration engineering, manufacture of signs, showcases, lighting of luminous characters of LED channel, supermarket shelves, cortine walls, etc.